 |
-
Ci4000氙燈老化試驗機
詳細信息| 詢價留言品牌：美國ATLAS 型號：Ci4000 加工定制：否 類型：氙燈老化試驗箱 材質：金屬塑料 溫度范圍：0-100 ℃ 功率：6500 W 工作室尺寸：400x500x300 mm 電源：380V 適用范圍：汽車塑料油漆涂料氙燈老化試驗 工作室尺寸：400x500x300 mm 電源：380V
-
支持6500W大功率精密水冷式氙燈燈管 - 總曝曬面積：6,500 cm2 (1,008 in2)
- 自動旋轉式3層樣品架
- 大屏幕全彩色TFT顯示自動診斷信息
- 直接設置和控制輻照度340nm、420nm、300-400nm
- 直接控制箱內溫度及黑板或/和黑標溫度
- 直接設置和控制相對濕度
- 直接設置和控制試驗艙內空氣溫度
- 顯示診斷信息
- 內置14個***主要國際標準
- 支持12個客戶自定義編程
- 多語種顯示（中、英、法、德、西、日、韓）
- U盤數據輸出接口
- 內置全球專利的Smart Damper™自動送風風速調節及智能化調風系統
- 內置全球專利的Smart Light™智能化燈光監測系統
- 樣架背面噴淋系統
- 過濾組合以滿足全部測試標準
- 進氣管除塵過濾器
- CS-7氙燈冷卻系統
- 自動水質監控及自動報警
- 參照氙燈校準
- 試驗箱觀察窗
- 全球通用電源系統，適用于各種頻率、電壓和電氣要求
- 電氣安全性能滿足CE、UL、CSA、EN、ISO標準
- 以輻照量和時間為單位自動倒計時功能
- 樣品架可容納多種類型的樣品
- VibraSonicTM加濕系統
-
BPT/BST雙控：可選 - 輻照度控制：340/420或300-400nm選擇單點自動控制,可選第二點監控
- 安裝在風道里的制冷線圈（不包含必要的制冷裝置）
- S3T特定試件表面溫度系統
- WXView（氣候觀察）數據獲取系統
- LiquiAirTM - LiquiAir熱交換器可減少Ci5000氙燈冷卻系統對自來水的需求，該系統采用室內外的空氣來冷卻氙燈水。
- 室內空氣和去離子水制冷
- 滿足特殊測試要求的輔助過濾燈罩
- Caster（4腳）包括適配器和安裝說明
- LS-200全譜監測設備
- 伸展腿（4腳：提升裝置 15厘米）
符合標準-
AATCC TM169
Weather Resistance of Textiles: Xenon Lamp Exposure -
ASTM C1257
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants -
ASTM C1442
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus -
ASTM C1501
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures -
ASTM C732
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants -
ASTM C734
Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering -
ASTM C793
Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants -
ASTM D1148
Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces -
ASTM D1670
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials -
ASTM D2565
Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications -
ASTM D3424
Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter -
ASTM D3451
Standard Guide for Testing Coating Powders and Powder Coatings -
ASTM D4101
Standard Specification for Polypropylene Injection and Extrusion Materials -
ASTM D4303
Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints -
ASTM D4355
Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus) -
ASTM D4434
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing -
ASTM D4459
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications -
ASTM D4798
Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) -
ASTM D4811
Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing -
ASTM D5010
Standard Guide for Testing Printing Inks and Related Materials -
ASTM D5019
Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane -
ASTM D5071
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus -
ASTM D5383
Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists -
ASTM D5398
Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User -
ASTM D5819
Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability -
ASTM D6083
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing -
ASTM D6551
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus -
ASTM D6577
Standard Guide for Testing Industrial Protective Coatings -
ASTM D6662
Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards -
ASTM D6695
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings -
ASTM D6878
Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing -
ASTM D7869
Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings -
ASTM F1164
Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress -
ASTM G151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources -
ASTM G155
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials -
FLTM BO 116-01
Resistance to interior weathering -
GB/T 8427
Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test -
GM 9125P
Procedures for Laboratory Accelerated Exposure of Automotive Materials -
GME 60292
Designation of Colour Fastness and Resistance to Artificial Light -
GMW 14162
Colorfastness to Artificial Weathering -
GMW 14650
Performance Requirements for Exterior Plastic Parts -
GMW 3414
Test Method for Artificial Weathering of Automotive Interior Trim Materials -
IEC 61345
UV test for photovoltaic (PV) modules -
ISO 105-B02
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test -
ISO 105-B04
Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test -
ISO 105-B06
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test -
ISO 105-B10
new standardTextiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation -
ISO 11341
Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation -
ISO 12040
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light -
ISO 16474-1
Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance -
ISO 16474-2
Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps -
ISO 18909
Photography - Processed photographic colour films and paper prints - Methods for measuring image stability -
ISO 3917
Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering -
ISO 4892-1
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance -
ISO 4892-2
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources -
JASO M346
Light-exposure test method by xenon-arc lamp for automotive interior part -
JASO M351
Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts -
JIS B 7754
Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type) -
JIS D 0205
Test Method of Weatherability for Automotive Parts -
MIL-STD 810F
Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine) -
MIL-STD 810G
Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine) -
Peugeot Citroen (PSA) D47 1431
Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures -
SAE J1885
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus -
SAE J1960
Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus -
SAE J2412
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus -
SAE J2413
Protocol To Verify Performance of New Xenon Arc Test Apparatus -
SAE J2527
Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus -
VDA 621-429
Tests for automotive coatings - Weathering test for colour fastness -
VDA 621-430
Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats -
VDA 75202
Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc -
VW PV 3930
Non-Metallic Materials - Weathering in Moist, Hot Climate
-
-
-
產品搜索
留 言
- 聯系人：謝文清
- 電 話：021-32535039
- 手 機：13472521719
- 傳 真：021-32535039
- 郵 箱：xiewenqing@shdzyq.com
- 郵 編：201821
- 地 址：上海市嘉定區德富路1198號803室太湖世家國際大廈
- 網 址： https://dingzhi1999.cn.goepe.com/
http://www.anyuantv.com
