用于DIN EN ISO 6270-2冷凝水試驗

 
用于DIN EN ISO 9227鹽霧試驗，不帶自動通風

 
用于執行鹽霧試驗和冷凝水試驗，這個系列為手動操作綜合試驗箱

 
可編程操作臥式試驗系統 ，在控制面板上，系統非常容易編程 。所有功能都顯示為多行菜單。 可編程系統可安裝在鹽霧試驗系統或綜合試驗系統上
 

 
 

冷凝試驗

 
循環腐蝕試驗箱

 
滿足VDA 233-102 -20度新版標準試驗箱已可以接受預定，
 

VDA 233-102

Cyclic corrosion testing of materials & components in automotive construction.

The purpose of this test is to provide an accelerated test procedure for the assessment of the corrosion behaviour of components and of the corrosion protection provided by coating systems. The test method is based on real corrosive conditions and delivers differentiated results for a large number of uses in automotive applications

Test specimens are placed in an enclosed chamber, and positioned at an angle of 65° to 75° to the horizontal with the side to be tested uppermost. The salt spray phase is performed with a 1% solution of sodium chloride, (pH 6.5 to 7.1) and falls out onto the specimens at a rate of 2.0 to 4.0ml/80cm²/hour.

A full test cycle lasts 7 days and consists of:

Cycles A,B & C are multi step cycles consisting of varying degrees of temperature from -15°C to +50°C and humidity values of between 50% and 95%.

The typical test duration is six full test cycles. (6 Weeks)